Andis clippers on sale at PPE! Which set would be best? - Page 3 - YorkieTalk.com Forums

kjc · 06-03-2011, 08:36 AM

Quote:

Originally Posted by Sookie

Mine didn't just get warm, they got seriously hot. Kalina has the thickest coat I have ever seen on a Yorkie but not nearly as much as, say, a Chow! I don't think they should get THAT hot. Maybe I should return mine since I just bought them last week and only used them once - well, four times if you count stopping and waiting for them to cool down.

Did you try a drop of oil on the blade? Never know how long they've been sitting around in the warehouse...

BonBon · 06-03-2011, 09:54 AM

Quote:

Originally Posted by kjc

Did you try a drop of oil on the blade? Never know how long they've been sitting around in the warehouse...

Since I'm the type who'll probably yank them out of the box without reading all the instructions first, maybe I'd better ask here - how often does the oil need to be applied to the blade?

jadabug · 06-03-2011, 10:01 AM

Quote:

Originally Posted by BonBon

Since I'm the type who'll probably yank them out of the box without reading all the instructions first, maybe I'd better ask here - how often does the oil need to be applied to the blade?

I use the spray during use,(usually once or twice per dog) which cleans and lubricates. I have the blade cleaner which I use when I am finished and I oil them after I clean them. The manufacturer recommends cleaning them before the first use as they are coated with something ( I can't remember what) From my research the blades will stay sharp and last so much longer if you keep them cleaned and oiled. I have used mine a total of 7 times (3 on Jada and 3 on Bogie and did my Mom's Biewer Jazzy) my blades still cut as good as new and like I said never get hot. I also read somewhere to never use your clippers on a dirty dog it will dull the blades.

kjc · 06-03-2011, 12:18 PM

Haha! I'm waiting for my new clippers to arrive, so I pulled the old Conair out, and read the instructions. It recommended at least once a month, depending on use, but only one drop, blade facing down, while turned on. Mine needed it as I immediately heard a change in the 'hum' of the motor... and they got a bit quieter, (and quicker!).

So I need to shave down the cat, and was getting everything ready... when DH decides he needs a haircut! Haha! Sure, hon, I'll shave your head! So someone suggested using a comb that leaves a longer cut first, as one can always go shorter... so I used the 7/8 in comb and I must say, it didn't turn out too bad. He said 'At least I didn't have to pay $15.00 for a haircut!' I said 'You're right! I charge $25.00' Lol!

jadabug · 06-03-2011, 12:50 PM

Quote:

Originally Posted by kjc

Haha! I'm waiting for my new clippers to arrive, so I pulled the old Conair out, and read the instructions. It recommended at least once a month, depending on use, but only one drop, blade facing down, while turned on. Mine needed it as I immediately heard a change in the 'hum' of the motor... and they got a bit quieter, (and quicker!).

So I need to shave down the cat, and was getting everything ready... when DH decides he needs a haircut! Haha! Sure, hon, I'll shave your head! So someone suggested using a comb that leaves a longer cut first, as one can always go shorter... so I used the 7/8 in comb and I must say, it didn't turn out too bad. He said 'At least I didn't have to pay $15.00 for a haircut!' I said 'You're right! I charge $25.00' Lol!

Did you collect?

I forgot to say to make sure tho oil them blade facing down. If you hold them up the oil will get into the motor and that isn't good

Sookie · 06-03-2011, 04:50 PM

Quote:

Originally Posted by kjc

Did you try a drop of oil on the blade? Never know how long they've been sitting around in the warehouse...

Yes, I oiled them according to the directions.

kjc · 06-04-2011, 12:28 AM

Quote:

Originally Posted by jadabug

Did you collect?

I forgot to say to make sure tho oil them blade facing down. If you hold them up the oil will get into the motor and that isn't good

The instructions did state that... No I did not collect... YET!

Thank you1

kjc · 06-04-2011, 12:30 AM

Quote:

Originally Posted by Sookie

Yes, I oiled them according to the directions.

Well that kind of sucks... guess you best return them then.

kalina82 · 06-04-2011, 05:57 PM

Hi Bonnie, sorry I haven't been on in a few days and just got your message today. I'm not much help when with the "pet" clippers as I've only used professional Andis clippers. I did buy a "pet" set when I first got Morgan before I learned to groom and I hated it. The clipper was loud, got hot quickly, and I managed to break the plastic combs. I don't remember what brand it was though.

I mainly use my Andis 5 speed, but I also have similar clippers to Jenny that are a little cheaper and better for your use. Andis UltraEdge 2-Speed Dog Clipper | PetEdge.com and Andis AGC 2-Speed Clipper w/ #10 Blade | PetEdge.com. The first one I bought after I broke the plastic combs on the first crappy clippers I bought from Walgreens. I also purchased a few blades to go with it. I still use these clippers as backup. The second set was given to me when I went to grooming school. They are similar to the Ultra Edge except a tad slower. There is also a single speed clipper that would be good for home use as well since you're just grooming yorkies. Andis AGC Single-Speed Clipper w/ #10 Blade | PetEdge.com

I also have these Wahl Arco SE Limited Edition Pink Cordless Clipper Kit | PetEdge.com which i just used to cut morgan down two weeks ago. Since she has a thick cotton coat I used the 9 blade setting on her body and then use a comb attachment and scissors on her legs and head. I like her really short in the summer because she gets hot and I'm too lazy to comb her legs after they get wet in the morning when the sprinklers go off right before she goes outside to potty.

(these are similar and very nice Wahl Color Bravura Cord/Cordless Clipper | PetEdge.com I used them to shave a few cats in school.)

If you get a clipper that uses detachable blades you can use any blade brand you want and don't have to stick with the same company. I prefer Geib Buttercut blades and Andis Blades. You can also use Whals and Osters. I'm not sure how well the master grooming and petedge ones work.

Andis clippers on sale at PPE! Which set would be best?-img_0398.jpg

Here I used a 7F all over on Morgan and scissored her head.

Andis clippers on sale at PPE! Which set would be best?-img_0305.jpg

In this one I used a 7F on the black parts of her body and a comb attachment/scissors on her legs and head.

Andis clippers on sale at PPE! Which set would be best?-img_0265.jpg

And in this one I used a 4F on her black body to keep it slightly longer and just neatened up her legs with scissors and thinners.

Morgan usually starts off in the spring with the first cut, then I just cut her body down and leave her legs alone the rest of the year or just scissor them up to neaten them. Sometimes instead of a 7F, I will use a 4F or 5F in reverse (going in the opposite direction of her hair growth) to make her hair even shorter. I also like to go in reverse on silky coated yorkies because it makes the cut neater and even all over. You have to be careful with silky coats because sometimes they have really sparse coat and if you go too short it can look like you balded them. Always start with a longer blade first if your not sure. This way if you want it shorter you can change blades. Just remember, you can always cut off more if the length isn't short even but you can't put it back on if you cut it shorter then you want.

As far as clipper spray and oil goes, I never use spray coolants. They cause residue build up and can ruin blades if the blades aren't cleaned properly after use. I have multiple blades of each size so if a blade is getting hot I can change it and use a cooler one. The hot blades I put on a cool counter top that is made of glass, metal, ceramic, or tile because it will draw the heat out of the blade faster to cool it. I use oil before, during, and after each blade use. If your blades are clean and oiled they will las longer. If they are not oiled properly they will heat up faster and wear down faster. I put a dab of oil on the tracks of the blade and slide the cutter back and forth to distribute the oil. then wipe off the excess with a towel before putting the blade on a clean coat. here is a video: http://www.northerntails.com/images/BC-Titles.wmv this site also has many other clipper care videos Videos for pet groomers

JMuedog · 06-08-2011, 05:11 PM

Quote:

Originally Posted by Sookie

Yes, I oiled them according to the directions.

I got my clippers today oiled them before, during and after clipping as the directions stated and WHOA did the clippers get hot! Gwenni has a thick coat too, but man...
I'm definitely returning if able! These are way too hot to use.

kalina82 · 06-08-2011, 05:29 PM

Quote:

Originally Posted by JMuedog

I got my clippers today oiled them before, during and after clipping as the directions stated and WHOA did the clippers get hot! Gwenni has a thick coat too, but man...
I'm definitely returning if able! These are way too hot to use.

how long were they clippers used before they got hot and what were you doing with them? Blades are going to get hot faster depending on what you are doing with them regardless of how much you oil them.

Peters · 06-08-2011, 05:41 PM

Higher speed/vibration cut easier

JMuedog · 06-08-2011, 05:46 PM

Quote:

Originally Posted by kalina82

how long were they clippers used before they got hot and what were you doing with them? Blades are going to get hot faster depending on what you are doing with them regardless of how much you oil them.

The actual clippers got hot I touched the blades and they weren't hot to the touch, the clippers were just hot to hold. They got hot pretty quickly. I was using 1 inch comb to trim down Gwenni's body. I'd say it got hot within 5 passes. Maybe since it was her first trim of the summer and her hair was longer it was working extra hard.

It wasn't unbearable to me but bf took them while I shifted Gwenni and he dropped them b/c they were too hot for him.

kalina82 · 06-08-2011, 05:50 PM

Quote:

Originally Posted by JMuedog

The actual clippers got hot I touched the blades and they weren't hot to the touch, the clippers were just hot to hold. They got hot pretty quickly. I was using 1 inch comb to trim down Gwenni's body. I'd say it got hot within 5 passes. Maybe since it was her first trim of the summer and her hair was longer it was working extra hard.

It wasn't unbearable to me but bf took them while I shifted Gwenni and he dropped them b/c they were too hot for him.

oh i see, the housing got hot. Which clippers did you get? The housing shouldn't get hot that quickly. Mine only get really hot if i am shaving down a large matted dog and have it on the highest speed (on my 5 speed clipper).

JMuedog · 06-08-2011, 07:08 PM

Quote:

Originally Posted by kalina82

oh i see, the housing got hot. Which clippers did you get? The housing shouldn't get hot that quickly. Mine only get really hot if i am shaving down a large matted dog and have it on the highest speed (on my 5 speed clipper).

I purchased these:
BLUE - Andis Easy Clip Grooming Kit - Andis Easy Clip Grooming Kit

Hopefully, they'll let me exchange them for another pair.

06-03-2011, 12:18 PM	#34
kjc I♥PeekTinkySaph&Finny Donating Member Join Date: May 2009 Location: Baltimore, Maryland Posts: 18,872	Haha! I'm waiting for my new clippers to arrive, so I pulled the old Conair out, and read the instructions. It recommended at least once a month, depending on use, but only one drop, blade facing down, while turned on. Mine needed it as I immediately heard a change in the 'hum' of the motor... and they got a bit quieter, (and quicker!). So I need to shave down the cat, and was getting everything ready... when DH decides he needs a haircut! Haha! Sure, hon, I'll shave your head! So someone suggested using a comb that leaves a longer cut first, as one can always go shorter... so I used the 7/8 in comb and I must say, it didn't turn out too bad. He said 'At least I didn't have to pay $15.00 for a haircut!' I said 'You're right! I charge $25.00' Lol! __________________ Kat Chloe Lizzy PeekABooTinkerbell SapphireInfinity

06-04-2011, 05:57 PM	#39
kalina82 Phantom Queen Morrigan Donating Member Join Date: May 2006 Location: with my yorkie baby Posts: 10,141 Blog Entries: 1	Hi Bonnie, sorry I haven't been on in a few days and just got your message today. I'm not much help when with the "pet" clippers as I've only used professional Andis clippers. I did buy a "pet" set when I first got Morgan before I learned to groom and I hated it. The clipper was loud, got hot quickly, and I managed to break the plastic combs. I don't remember what brand it was though. I mainly use my Andis 5 speed, but I also have similar clippers to Jenny that are a little cheaper and better for your use. Andis UltraEdge 2-Speed Dog Clipper \| PetEdge.com and Andis AGC 2-Speed Clipper w/ #10 Blade \| PetEdge.com. The first one I bought after I broke the plastic combs on the first crappy clippers I bought from Walgreens. I also purchased a few blades to go with it. I still use these clippers as backup. The second set was given to me when I went to grooming school. They are similar to the Ultra Edge except a tad slower. There is also a single speed clipper that would be good for home use as well since you're just grooming yorkies. Andis AGC Single-Speed Clipper w/ #10 Blade \| PetEdge.com I also have these Wahl Arco SE Limited Edition Pink Cordless Clipper Kit \| PetEdge.com which i just used to cut morgan down two weeks ago. Since she has a thick cotton coat I used the 9 blade setting on her body and then use a comb attachment and scissors on her legs and head. I like her really short in the summer because she gets hot and I'm too lazy to comb her legs after they get wet in the morning when the sprinklers go off right before she goes outside to potty. (these are similar and very nice Wahl Color Bravura Cord/Cordless Clipper \| PetEdge.com I used them to shave a few cats in school.) If you get a clipper that uses detachable blades you can use any blade brand you want and don't have to stick with the same company. I prefer Geib Buttercut blades and Andis Blades. You can also use Whals and Osters. I'm not sure how well the master grooming and petedge ones work. Here I used a 7F all over on Morgan and scissored her head. In this one I used a 7F on the black parts of her body and a comb attachment/scissors on her legs and head. And in this one I used a 4F on her black body to keep it slightly longer and just neatened up her legs with scissors and thinners. Morgan usually starts off in the spring with the first cut, then I just cut her body down and leave her legs alone the rest of the year or just scissor them up to neaten them. Sometimes instead of a 7F, I will use a 4F or 5F in reverse (going in the opposite direction of her hair growth) to make her hair even shorter. I also like to go in reverse on silky coated yorkies because it makes the cut neater and even all over. You have to be careful with silky coats because sometimes they have really sparse coat and if you go too short it can look like you balded them. Always start with a longer blade first if your not sure. This way if you want it shorter you can change blades. Just remember, you can always cut off more if the length isn't short even but you can't put it back on if you cut it shorter then you want. As far as clipper spray and oil goes, I never use spray coolants. They cause residue build up and can ruin blades if the blades aren't cleaned properly after use. I have multiple blades of each size so if a blade is getting hot I can change it and use a cooler one. The hot blades I put on a cool counter top that is made of glass, metal, ceramic, or tile because it will draw the heat out of the blade faster to cool it. I use oil before, during, and after each blade use. If your blades are clean and oiled they will las longer. If they are not oiled properly they will heat up faster and wear down faster. I put a dab of oil on the tracks of the blade and slide the cutter back and forth to distribute the oil. then wipe off the excess with a towel before putting the blade on a clean coat. here is a video: http://www.northerntails.com/images/BC-Titles.wmv this site also has many other clipper care videos Videos for pet groomers __________________ Kellie and Morgan Last edited by kalina82; 06-04-2011 at 05:59 PM.

06-08-2011, 05:41 PM	#42
Peters YT 2000 Club Member Join Date: May 2006 Location: Alabama Posts: 2,225	Higher speed/vibration cut easier __________________ A pet's love is true right from the start, through good times and bad, like sharing one heart.