 birthing bed
We made a birthing bed,you start with a pice of wood,making it 36 by 36,we then put a 6x2 nailed to pice of wood for the botton,after all 4 sides are nailed together,then we put a 2 by 1 pice cut to put around the in side 3 inches from the floor. this is so the puppies can get under there and mother will not roll un the puppies.I put heating pad in the box,o ya we drill a hole to put the cord on the out side,i keep the heating pad on low,hope this helps for some one.cath54 |